Parts identification Of The Canned Vertical Turbine Pump (VTP) with the suction barrel

Cross Section: Typical Suction Barrel Canned Vertical Turbine pump (VTP), vertical can condensate extraction turbine pumps, are specified wherever limited NPSH is available, either due to system constraints or liquids operating near to their vapor pressure, typically for condensate extraction and heater drain pump applications. NPSH requirements of the pump are met by simply adjusting the length of the pump and can, with the advantage of minimized floor space usage.

See Figure A and Figure B for parts details.

All the sectional drawings provided in this section are typical representations of the most common Canned Vertical Turbine pump types and are provided for the purposes of basic understanding of the equipment.

The details shown may not reflect the specifics of the Canned Vertical Turbine pump that has been purchased. Order-specific cross sectional drawings and parts list can be purchased from Perfect Industry separately. Contact China Perfect Industry Co., Ltd for ordering and pricing information on such drawings and documentation.

Parts identification: Discharge head/column/suction barrel

Typical product lubricated Canned Vertical Turbine pump (VTP) with a suction barrel

Parts list-Discharge head/column/suction barrel  See Figure A.

Parts identification: Column and bowl assembly

Typical product lubricated Canned Vertical Turbine pump (VTP) with the suction barrel

Parts list- Column and bowl assembly See Figure B.